DIGI logo
Knowledge base
Production efficiency

What is OEE and why measure it at all?

Piotr Piorunkiewicz
14 November 20259 min read
Factory workers checking the quality of manufactured products on the shop floor

The plan for the shift says 100 parts, and 70 come off the line. One machine keeps “stopping for something”, another “runs a bit slower”, a third produces the most scrap. At the end of the day all we know is that the result is worse than it should be, but it is hard to say clearly why.

The OEE (Overall Equipment Effectiveness) indicator was created for exactly this situation. OEE is not another fashionable abbreviation, but a way of calculating how well we use the potential of our machines:

In simple words: OEE tells you what percentage of the available time a machine spends producing good parts at the target speed.

For a production manager, a director or a plant manager it answers several key questions:

  • Do we really need a new machine, or should we first make better use of the one we already have?
  • Where is the bottleneck – at which cell is capacity really being lost?
  • Is the difference between shifts an impression, or hard numbers?
  • What are the biggest sources of loss: breakdowns, changeovers, slow running or quality defects?

To understand that, you need to know what OEE is made of.

The three pillars of OEE: availability, performance and quality

OEE is built from three elements:

  1. Availability
  2. Performance
  3. Quality

OEE is the product of these three values (each expressed as a percentage).

1. Availability – how much time does the machine really work?

Availability answers the question:

Of the planned production time, how much time was the machine actually ready to work and working?

The non-working time includes, among others:

  • breakdowns and damage,
  • long and frequent changeovers,
  • missing material or tools,
  • waiting for a decision, a program or documentation.

If on an 8-hour shift (after subtracting breaks, meetings and so on) the machine was supposed to work for, say, 7 hours, and because of breakdowns and changeovers it really worked for only 5 hours, then availability is lower than it could be.

2. Performance – how fast do we produce?

Performance (sometimes called speed) says:

Of the time the machine was working, what percentage of its target speed did we use?

Examples of performance losses:

  • the machine runs slower than the assumed takt or cycle,
  • frequent “micro-stops” – short stoppages that seem insignificant one by one, but add up to hours,
  • too few parts per hour for the same working time.

A machine can be available (not standing because of a breakdown), but if someone slows it down “just in case”, or the process is badly set up – the OEE result drops too.

3. Quality – how many good parts come out of the process?

Quality in OEE is:

What percentage of the parts produced is good, and how many go to scrap, rework or rejects?

All parts that are:

  • non-conforming to requirements,
  • in need of rework,
  • rejected by inspection,

count as a quality loss. The machine may have worked the whole time and at a good speed, but if 10–20% of production is scrap – OEE will show it clearly.

A simple example from the shop floor

Let us assume we have one machine:

  • the shift lasts 8 hours = 480 minutes,
  • breaks, meetings and so on: 60 minutes → planned production time: 420 minutes,
  • in that time there were breakdowns, changeovers and material shortages: 120 minutes → actual machine running time: 300 minutes.

Step 1: Availability

Availability = actual running time / planned production time

Availability = 300 / 420 ≈ 71%

Step 2: Performance

Let us assume that:

  • the nominal speed of the machine is 4 parts per minute,
  • in 300 minutes we should ideally make 300 × 4 = 1200 parts,
  • we really produced 900 parts (good and scrap together).

Performance = actual parts / parts in an ideal world

Performance = 900 / 1200 = 75%

Step 3: Quality

Of the 900 parts:

  • 840 are good,
  • 60 are defects to be rejected or reworked.

Quality = good parts / total parts

Quality = 840 / 900 ≈ 93%

Step 4: OEE

OEE = Availability × Performance × Quality

OEE ≈ 71% × 75% × 93% ≈ 50%

What does that mean?

  • Not that “someone works badly”, but that the machine spends half of its potential on losses:
    • part of it as downtime,
    • part of it as running too slowly,
    • part of it as quality defects.

Breaking OEE down into 3 components shows where the biggest problem is – whether availability, performance or quality hurts most.

What does OEE tell a production practitioner?

A well-calculated OEE is:

1. Information on how the machine park is used

You can see whether the problem is that there are too few machines, or rather that:

  • changeovers take too long,
  • breakdowns happen too often,
  • we produce too much “on slow”.

2. A magnifying glass on bottlenecks

A low OEE at a particular station often means that this is the one that:

  • limits the capacity of the whole line,
  • generates the most downtime,
  • drags down the result of the whole cell.

3. Support for investment and automation decisions

Before you buy another machine or a robot, you can check:

  • at which station OEE is lowest,
  • what it comes from (breakdowns, changeovers, slow running, scrap),
  • whether it would not be better first to improve and stabilise the existing station.

4. A basis for planning and on-time delivery (OTD)

With a real OEE it is easier to estimate:

  • how much time you actually need for a given batch,
  • whether the current machine park will deliver the plan,
  • where the risk of delay is highest.

5. Comparing shifts and teams – with care

OEE lets you see differences between shifts, but:

  • you have to take into account the kind of products being made,
  • do not draw simple conclusions such as “this shift is worse” just because it had a more demanding production mix.

Typical mistakes when working with OEE

It is a very useful indicator, but also one that is often misunderstood and miscalculated. Some of the most common traps:

1. No standard for the calculation

Every department, and sometimes every shift, calculates OEE “its own way”:

  • different definitions of planned time,
  • a different approach to changeovers,
  • different criteria for what counts as scrap.

The effect? The numbers cannot be compared, misunderstandings arise and the indicators themselves lose credibility.

2. Poor input data

If:

  • stoppages are booked as “other”,
  • scrap is not reported reliably,
  • micro-stops are not recorded at all,

then OEE will be a number “out of thin air”. A system, a spreadsheet or a board is only a tool – without reliable recording of events the indicator makes no sense.

3. Comparing lines without context

Two lines stand next to each other:

  • Line A: OEE = 65%
  • Line B: OEE = 30%

At first glance A looks “better”. But:

  • Line A makes one simple product, in long runs,
  • Line B – several dozen variants, short runs, frequent changeovers.

In that case 30% does not have to be a bad result, and 65% does not mean “excellent” work at all. A number without context can lead to bad decisions.

4. Using OEE to judge people

OEE shows how effectively the machine and the process are used, not how “hard-working” the operator is.

If the indicator is used to:

  • look for someone to blame on the shop floor,
  • “chase” shifts,
  • punish a low result,

it will quickly become a tool of defence, not of improvement. The data will be distorted and people will stop trusting the indicators.

5. Blindly chasing the “ideal” OEE

In some processes:

  • it is technologically impossible to reach a very high OEE (for example a highly varied product range, high planned scrap),
  • trying to “straighten” everything to one number can lead to bad decisions (for example giving up small runs that the business needs).

More important than a “magic” level is whether OEE:

  • is measured in a uniform way,
  • rises over time where we take action,
  • shows the real bottlenecks.

How to start measuring OEE in your factory?

You do not have to cover the whole plant with an extensive system straight away. A good start is:

1. Pick one key machine or cell

Ideally:

  • the bottleneck,
  • a machine that is “critical” for on-time delivery,
  • a station where downtime really hurts.

2. Set a clear standard

With the key people (production, maintenance, quality) agree:

  • what is planned time and what is unplanned,
  • how you classify changeovers, breakdowns and material shortages,
  • what you count as scrap and where rework goes.

Write it down – simply, but specifically. That is the basis for the data to mean the same thing from week to week.

3. Start with simple data collection

At the beginning it is enough to have:

  • a table (paper or Excel),
  • a simple form,
  • an operator panel with a few buttons.

What matters is to record consistently:

  • start and stop times,
  • the type of stoppage,
  • the number of good parts,
  • the number of defects.

After just a few weeks the first patterns show: whether changeover time, breakdowns or loss of speed dominates.

4. Discuss the results with the team

At daily or weekly meetings:

  • show Availability, Performance and Quality separately,
  • pick 1–2 main causes of loss and agree actions,
  • come back to the same indicators after the changes are in place (“before versus after”).

The point is for OEE to become a tool:

  • for asking questions (“why are we losing time here?”),
  • and not a hammer to hit people with.

5. Think about automation once the indicator “makes sense”

When the standard is clear and the team sees that OEE helps in their work rather than getting in the way – that is when it makes sense to:

  • move from manual notes to a system that calculates OEE in real time,
  • integrate with the machines and the ERP,
  • extend it to further lines, shifts and plants.

Summary

OEE is not a magic number that will “solve the problems with production”. It is a compass that shows:

  • how much we lose to downtime,
  • how much to running too slowly,
  • how much to quality defects.

A well-calculated and well-understood OEE helps to:

  • find the real bottlenecks,
  • make decisions based on data (not on hunches),
  • improve efficiency without immediate investment in new machines.

If you are just starting, do not aim for “ideal” values straight away. Start with one machine, a clear standard and simple measurement. Over time OEE can become a natural part of day-to-day production management – and a solid basis for further automation, digitalisation and the development of efficiency monitoring systems.

Related terms